HI PERFORMANCE FM-100MWS-LCD-E

Digital PLL FM stereo transmitter

Our New FM-100mW-LCD unit is ready to go and comes complete with a compact rubber duckie antenna and well regulated 12 volt power supply that works with 120 or 240 VAC sources.  

All you need to do is hook up your audio source to the RCA inputs on the back of the unit, and you are on the air! 

This NEW 100 milliwatt FM stereo transmitter will well out perform most of the low cost units on the market since it was carefully designed to pass even the very lowest audio frequencies down to 20 Hz and up to 15 KHz for the high frequencies.  Believe me, this unit sounds just like the big stations!  Excellent base and highs!!!

Its highly accurate crystal reference and PLL circuitry ensure you will have a very stable signal at all times.   The frequencies can easily be selected by pushing the recessed buttons using a paper clip wire.  The frequency range is 88 to 108 MHz and the channel resolution is 100KHz.  I should also mention that the stereo separation is excellent!  We tested this unit against 4 other stereo unit that did not even come close. 

The unit is housed in a very nice extruded aluminum enclosure that shields the unit.  No cheap plastic box used here!  For more range a high gain antenna could be used and connected to the standard BNC connector on the back of the unit.

If you are seriously looking for a high performance Stereo transmitter, this is definitely the one!