1. Twelve Units 1KW hotplug RF power
modules. Total output power is extremely stable thanks
to AGC (Automatic Gain
Control).
2. Ten units 2.5KVA
switched power supply modules working parallel.
3. 12-way High efficiency combiner with
patented technology.
4. Two All-digital 30W exciters with
switcher used to drive each module directly.
5. Analog and digital (AES/EBU) audio signal input
directly.
6. 8-inch Color
LCD with touch panel displays
for all the parameters in real time.
7. Five kinds of protection methods by MCU, like
over Pf, over
SWR, over
Temp, Voltage, and Current.
8. Real hot-plug structure, the modules can be
repairing at non-stop condition.
9. RS232/RS485 Communication interface ready for
remote system.
Technical
specifications:
1. Frequency Range: 87.0MHz~108 MHz
2. Frequency Setting
step: 10KHz
3. Carrier Frequency precision: 200Hz
4.
Residual Wave Radiation: 65dBc
5. Analog audio Input
Impedance: 600 ohms, Balanced
AES/EBU digital
audio input impedance: 110 Ohm, Balanced
6. Separation:
55dB, 30Hz~15KHz
7. Audio Input Level: -10dBm~+10dBm, step
0.01dB
8. S/N: 75dB (1kHz, 100%modulation)
9.
Audio Harmonic Distortion: 0.1%
10. Audio response:0.05dB
(10Hz~15KHz)
11. Output Load Impedance: 50 ohms
12. Output Power: 10KW
13. Pre-emphasis:
0S, 50uS, 75uS
14. Deviation: +75kHz
15. Pilot
Frequency: 19 kHz; 1Hz
16. RF Output Interface:
3+1/8'
17.Size: Width (122mm), Height (1950mm), Depth
(1200mm)
18.Weight: 700KG
