5kw circular wideband

Broadband FM Circular
Polarization Antenna

Antena de FM Banda Ancha
Polarizacion Circular

Model BKG/77 HIGH POWER

With 7/8 connector $1080 USD

This antenna constructed completely of stainless steel, offers the possibility of simultaneously utilizing vertical and horizontal polarization for better coverage especially in urban areas. In order to facilitate and decrease shipping costs this model is simple to break down and reassemble when ready to be installed. It is insulated with teflon, has a 7/8 connector and maximum input of 5 kW.

Esta antena fabricada completamente de acero inoxidable le ofrece la posibilidad de usar la polarización vertical y horizontal al mismo tiempo para mejor alcance, especialmente en zonas urbanas. Para facilitar y desminuir los costos de transportación este modelo es fácil de desarmar y volver a montar tan pronto que la quiera instalar. Está aislada con teflon, tiene un conector de 7/8" y una entrada máxima de 5 kW.

TECHNICAL SPECIFICATIONS:

Antenna type	circular polarization dipole
Frequency Range	87.5 - 108 MHz
Bandwidth	16 MHz
Impedance	50 Ohms
Connectors	EIA 7/8
Power Rating	5000 Watts max.
VSWR	< 1.3
Polarization	vertical and horizontal
Power Gain	0.47
H plane	omnidirectional ±1.5 dB (with a 4" mast)
V plane	omnidirectional ±3 dB (with a 4" mast)
Front-to-back ratio	3 dB
Lightening protection	all parts grounded
Max wind velocity	119 mph (190 km/h)
Wind load	(56 kg)
Wind surface	0..19 yd² (0.18 m²)
Materials (external)	stainless steel
Mounting	from 2" to 4"
Weight	30 Lbs (12 kg)
Dimensions	58"×32"×32" (1450×800×800 mm)
Packing	72"×8"×8" (1500×203×203 mm)

BKG/77 HP	Horizontal Pattern	Vertical Pattern	Value Table
Single Bay	Horizontal	Vertical	Table
2-Bay System	Horizontal	Vertical	Table
4-Bay System	Horizontal	Vertical
6-Bay System	Horizontal	Vertical	Table
8-Bay System	Horizontal	Vertical	Table

FM Power Dividers for use with Bay antennas

Divisores de
Potencia para FM

Model BAC & BAP Series

These dividers are available in different versions depending on the bandwidth and power input needed. They are made of brass with internal silver plated lines and teflon insulators. Power dividers may be custom ordered to meet any input and output connector combination requirements not listed below.

Estos divisores son disponibles en diferentes versiones dependiendo de la amplitud de banda y la potencia de entrada que se necesita. Son fabricados de latón con cables internos plateados y insulados con teflón. Las divisores de potencias pueden ser pedidos a medida para satisfacer cualquiera exigencia de combinación de conectores de entrada y salida que no está mencionada en la lista abajo.

TECHNICAL SPECIFICATIONS:

Impedance: 50 Ohms VSWR: 1.05:1 Frequency Bandwidth: 10 MHz (BAC series), 25 MHz (BAP series)

BAC & BAP Series DIMENSIONS (inches)

A=Diameter at narrow end, B=Length, C=Diameter at wide end

MODEL	PRICE IN USD	INPUT	OUTPUTS	MAX POWER	A	B	C
BAC2N	$535	N	2 N	1000 W	1.3	32	3.5
BAC3N	$545	N	3 N	1000 W	1.3	32	3.5
BAC4N	$565	N	4 N	1000 W	1.3	32	3.5
BAC6N	$595	N	6 N	1000 W	1.3	32	3.5
BAC2L	$600	LC or 7/16	2 N	2000 W	1.3	33	3.5
BAC3L	$615	LC or 7/16	3 N	2000 W	1.3	33	3.5
BAC4L	$625	LC or 7/16	4 N	2000 W	1.3	33	3.5
BAC6L	$660	LC or 7/16	6 N	2000 W	1.3	33	3.5
BAC2FL	$735	EIA 7/8	2 LC or 7/16	5000 W	1.3	35	4.7
BAC3FL	$780	EIA 7/8	3 LC or 7/16	5000 W	1.3	35	4.7
BAC4FL	$815	EIA 7/8	4 LC or 7/16	5000 W	1.3	35	4.7
BAC6FL	$925	EIA 7/8	6 LC or 7/16	5000 W	1.3	35	4.7
BAC2FLP	$1075	EIA 1⁵/₈	2 EIA 7/8	10000 W	2.3	36	6.7
BAC3FLP	$1115	EIA 1⁵/₈	3 EIA 7/8	10000 W	2.3	36	6.7
BAC4FLP	$1190	EIA 1⁵/₈	4 EIA 7/8	10000 W	2.3	36	6.7
BAC6FLP	$1310	EIA 1⁵/₈	6 EIA 7/8	10000 W	2.3	36	6.7
BAP2N	call	N	2 N	1000 W	1.3	65	3.5
BAP3N	call	N	3 N	1000 W	1.3	65	3.5
BAP4N	$835	N	4 N	1000 W	1.3	65	3.5
BAP6N	$875	N	6 N	1000 W	1.3	65	3.5
BAP2L	call	LC or 7/16	2 N	2000 W	1.3	66.1	3.5
BAP3L	call	LC or 7/16	3 N	2000 W	1.3	66.1	3.5
BAP4L	$920	LC or 7/16	4 N	2000 W	1.3	66.1	3.5
BAP6L	$960	LC or 7/16	6 N	2000 W	1.3	66.1	3.5
BAP2FL	call	EIA 7/8	2 LC or 7/16	5000 W	1.3	67	4.7
BAP3FL	call	EIA 7/8	3 LC or 7/16	5000 W	1.3	67	4.7
BAP4FL	$1190	EIA 7/8	4 LC or 7/16	5000 W	1.3	67	4.7
BAP6FL	$1355	EIA 7/8	6 LC or 7/16	5000 W	1.3	67	4.7
BAP2FLP	call	EIA 1⁵/₈	2 EIA 7/8	10000 W	2.3	69	6.7
BAP3FLP	call	EIA 1⁵/₈	3 EIA 7/8	10000 W	2.3	69	6.7
BAP4FLP	$1545	EIA 1⁵/₈	4 EIA 7/8	10000 W	2.3	69	6.7
BAP6FLP	$1835	EIA 1⁵/₈	6 EIA 7/8	10000 W	2.3	69	6.7

Contact Information:

Contacto: